LED infrared emission tube product use:

1. Signal light source suitable for all kinds of photodetectors.

2. Applicable to all kinds of photoelectric control automatic control instruments, sensors, etc.

3. According to the driving method, stable light, pulsed light and slowly changing light can be obtained, which are often used for remote control and alarm.

Features:

       1. Adopting a structure with reflection function, it can concentrate the infrared rays on the side of the die and generate strong optical power.

2. With high output optical power and low driving voltage.

3, easy to match the transistor integrated circuit.

4, small size, light weight, strong structure and shock resistance, high reliability.

5, metal glass packaged devices, with glass surface wear resistance, high finish, resistance to welding, high temperature resistance and other characteristics.

Precautions for use:

1. Pay attention to the polarity of the pipe. The pipe should not be close to the heating element in the circuit. The working process must not exceed the specified limit value.

2. In order to improve the light transmittance of the product, the light-receiving surface of the product is prevented from rubbing with hard objects such as metal, and it is not allowed to be sandblasted.

3, the welding temperature should not be too high, the welding time should be as short as possible, the solder joint should be away from the device body.

4. The forming of the leads should be carried out before soldering so that the components themselves have no residual stress.

5. The cutting of the lead wire should be carried out at room temperature. After soldering, the device leads are cut and need to be cooled.

6. The luminous power of the infrared emitting diode and the sensitivity of the photosensitive device are angularly distributed due to the package. Pay attention to the orientation adjustment of the installation when using, and adjust accordingly when replacing.